61622 – ITNE2005Develop a security Infrastructure for a Medium-Size

SOLUTION AT Australian Expert Writers

a Infrastructure for a Medium-Size NetworkAssignmentObjective(s)This assessment item relates to the unit learning outcomes as in the unit descriptor. This assessment is designed to evaluate student’s ability on working with the routers, firewalls and VPN tunnels and adopting those technologies in enterprise level networks.The following ULOs are assessed in this assent assessment.LO 1Explain network security issues and develop a comprehensive network security policy to counter threats against securityLO 2Analyse and configure routers on the network perimeter with router software security featuresLO 3Evaluate and configure firewall protocols and features to perform basic security operations on a networkLO 4Critically review the enterprise network requirements and configure site-to-site virtual private networks using standard router software featuresLO 5Analyse the enterprise security requirements and configure intrusion prevention systems on network routersLO 6Monitor network traffic and implement security policies to control access, resist , and protect network devicesINSTRUCTIONSThese apply to AssignmentAssignment (Weightage 20%) – The report should be uploaded on the LMS by Session 12Demonstration: Due on Lesson 12 in classThis Assignment will on student’s ability to work on an enterprise level network and handle network devices. Upon the implementation of the network, student should produce a comprehensive report, which includes screenshots of entering configuration commands and brief explanation of the screenshots. The devices should be named with the respective student IDIf any third-party content is used. The citation of sources is mandatory and should IEEE style.What to Submit.Submit your report to the Moodle drop-box for Assignment. Note that incidents of plagiarism will be penalized.Please Note: All work is due by the due date and time. Late submissions will be penalized at the rate of 10% per day including weekends.Assignment Description:Figure 1: Network TopologyNote: Integrated Services Routers (ISR) have Fast Ethernet interfaces instead of Gigabit Ethernet interfaces.Addressing TableDevice Interface IP Address Subnet Mask Default Gateway Switch PortR1-S0000 F0/0 N/A ASA G0/0S0/0 (DCE) N/A N/ALoopback 1 N/A N/AR2-S0000 S0/0 N/A N/AS0/1 (DCE) N/A N/AR3-S0000 F0/1 N/A S3 G0/0S0/0 N/A N/AS1-S0000 VLAN 1 N/AS2-S0000 VLAN 1 N/AS3-S0000 VLAN 1 N/AASA VLAN 1 (G0/1) N/A S2 G0/0VLAN 2 (G0/0) N/A R1 F0/0VLAN 3 (G0/2) N/A S1 G0/0PC-A NIC S1 G0/1PC-B NIC S2 G0/1PC-C NIC S3 G0/1In this Assignment you are required to complete all the following parts:Task 1: Configure Basic Device Settings:• Configure host names as shown in the topology plus your student ID.• Configure interface IP addresses as shown in the IP Addressing Table.• Configure static and dynamic routingTask 2: Configure Secure Router Administrative Access• Configure encrypted passwords and a login banner.• Configure the EXEC timeout value on console and VTY lines.• Configure login failure rates and VTY login enhancements.• Configure Secure Shell (SSH) access and disable Telnet.• Configure local authentication, authorization, and accounting (AAA) user authentication.• Secure the router against login attacks and secure the IOS image and the configuration file.• Configure a router NTP server and router NTP clients.• Configure router syslog reporting and a syslog server on a local host.Task 3: Configure a Zone-Based Policy Firewall and Intrusion Prevention System• Configure a Zone-Based Policy Firewall (ZPF) on an R3 using the CLI.• Configure an intrusion prevention system (IPS) on an R3 using the CLI.Task 4: Secure Network Switches• Configure passwords and a login banner.• Configure VLAN access.• Secure access ports.• Protect against Spanning Tree Protocol (STP) attacks.• Configure port security and disable unused ports.Task 5: Configure ASA Basic Settings and Firewall• Configure basic settings, passwords, date, and time.• Configure the inside and outside VLAN interfaces.• Configure port address translation (PAT) for the inside network.• Configure a Dynamic Host Configuration Protocol (DHCP) server for the inside network.• Configure administrative access via Telnet and SSH.• Configure a static default route for the Adaptive Security Appliance (ASA).• Configure Local AAA user authentication.• Configure a DMZ with a static NAT and ACL.• Verify address translation and firewall functionality.Task 6: Configure a DMZ, Static NAT, and ACLs on an ASA• Configure static NAT to the DMZ server using a network object.• View the DMZ Access Rule (ACL) generated by ASDM.• Test access to the DMZ server from the outside network.Task 7: Configure ASA Clientless SSL VPN Remote Access Using ASDM• Configure a remote access SSL VPN using the Cisco Adaptive Security Device Manager (ASDM).• Verify SSL VPN access to the portal.Task 8: Configure a Site-to-Site VPN between the ASA and R3• Configure an IPsec site-to-site VPN between the ASA and R3-S0000 using ASDM and the CLI.• Activate and verify the IPsec site-to-site VPN tunnel between the ASA and R3.Upon Completion of the above configuration tasks, you have been asked to draft a Policy on using of VPN by telecommuters. The policy should include the following sections:1. Objectives 3. Audience 5. Exceptions2. Purpose 4. Policy 6. ViolationsNOTE: To complete the Assignment, refer to Assignment Supplementary Document.Marking Guide: 100 MarksPlease note that the Assignment will contribute towards 20% of the final grade.Task Description MarksFinal Report 80Report Layout The report style, language and structure should be appropriate. All screenshots and descriptions need to be compiled and in a single final report and any given suggestions need to be incorporated.The report must containi. Cover page with Unit Code, Unit Name and Student IDii. Table of Contentsiii. Introduction iv. Technical Discussionv. Policy Document on using of VPN by telecommutersvi. Critical Analysisvii. Conclusion 5Introduction The introduction should include purpose of the report, sections covered which should convince the reader that the report is worth reading. Word count limit – 125 words4TechnicalDiscussionThis section should include the configurations done in the virtualized network environment. You should break down this section into eight tasks and include at least 6 screen shots from each of these tasks and a brief descriptioni. Task 1: Configure Basic Device Settings: ii. Task 2: Configure Secure Router Administrative Accessiii. Task 3: Configure a Zone-Based Policy Firewall and IntrusionPrevention System iv. Task 4: Secure Network Switchesv. Task 5: Configure ASA Basic Settings and Firewallvi. Task 6: Configure a DMZ, Static NAT, and ACLs on an ASAvii. Task 7: Configure ASA Clientless SSL VPN Remote Access UsingASDMviii. Task 8: Configure a Site-to-Site VPN between the ASA and ISR 45555555510Policy Document on using of VPN bytelecommutersThe policy should comprehensively cover all the aspects related to connecting to an enterprise network by a telecommuter 10Critical Analysis The students are required to provide a critical analysis of the deployed network considering:a) Confidentiality 10b) Integrityc) Availabilityd) Performancee) ScalabilityConclusion Summarize your findings. Word count limit – 125 words4References Should follow IEEE style.2DemonstrationIn classdemonstration – 10 mins The students are required to demonstrate in class, during Lesson 12 20

Order from Australian Expert Writers
Best Australian Academic Writers