62593 – Assessment item 2 – Packet Tracer and IoT Development

SOLUTION AT Australian Expert Writers

Assignment Details:
item 2 – Packet and IoT Tasksback to topValue: 25%Due Date: 10-Jan-2021Return Date: 01-Feb-2021Group Assessment: NoSubmission method options: Alternative methodTASKThis assignment is comprised of two . The tasks are outlined below.Task OneYou are an IoT Developer at HomeOfTheBrave Ltd and you are about to start a project where you have been tasked with setting up an IoT home office with a remote link to the company’s head office. The project is divided into 2 parts:• Create a home office with the criteria and devices given in the town of Byron Heads.• Control these smart devices from the head office which is a few miles north, but across state lines, in the city of Brispain.The home office includes, but is not limited to the following smart devices:• 1 x Front Door Lock• 1 x Garage Door• 1 x Motion Detector• 1 x Air Conditioner (AC)• 1 x Portable Music Player• 1 x Carbon Monoxide Detector• 1 x Thermostat• 1 x SirenThese devices are linked to a Wireless Router, which is linked via an Ethernet cable to a Cable Modem. The modem is connected to the Internet via an ISP known as ALDOT. All the devices are registered on a Remote Server which can be controlled locally by a Tablet that is also connected to the wireless network. The Remote Server is connected to the Company’s Cloud Cluster service (run by SmokeHaze Servers), as well as an external server that the home office uses for media streaming.Ensure that you add ALL necessary screenshots with the documentation as well as the packet tracer file to be presented to the manager for project approval.Build and configure the home office. (Refer to the file on the Student Resources named Assignment_2_Help). Save the file as StudentID_Firstname_ITC560.pkt (using your own student ID and first name). A template exists in the Cisco Network Academy IoT Course.All screenshots for each step with a brief explanation must be included in the document. Once the Assignment is complete, the student must embed the packet tracer file as an object in the word document as StudentID_Firstname_ITC560.pktPart 1A (4 marks)The home office is connected to the Internet Service Provider using a Cable Modem. Once that is in place, Add, connect, enable and configure the registration server, tablet and wireless router for the home office. The network must implement security protocols and techniques. You should define a suitable addressing scheme and ensure that your devices get addresses via DHCP where appropriate.All the devices for the home office as outlined above should be represented in this environment.Create a DNS name server to resolve the names of the devices in this environment. Use DNS wwwFirstName.com (where FirstName is your own first name) to access the connected devices.Part 1B (3 marks)Add the head office in a different city. Use your smartphone and connect it to the head office server. You can use any connecting and intermediary devices of your choice. Log on to the web browser on your tablet/smartphone and manage the devices.Use your tablet/smartphone to:• Lock the Front Door• Open the Garage door• Play ‘music’ through the Portable Music Player• Unlock the front door• Test the siren• Switch on the Air ConditionerPart 1C (3 marks)For the final part of this task, embed the following logic in the main office.• When the motion detector detects motion, set off the alarm and lock the door.• Increase the carbon monoxide level and open the garage door (it should also close when the level reduces).You must demonstrate the operation of each of these criteria.Task TwoYou are given the task of implementing an IoT service by gathering real-world data from actual IoT sensors. This scenario will be explained further in your tutorial tasks.You have recently been appointed to the Bureau of Meteorology (BOM).You have been asked to write a piece of software using Python to gather data from the Yanco (NSW) IoT sensor. The BOM makes all data available via a standardized web interface. In the case of the Yanco (NSW) sensor, this data can be found athttp://www.bom.gov.au/fwo/IDN60801/IDN60801.95705.jsonThe data returned through this API represents the last three days of sensor data, collected at appropriate intervals by the BOM Fog environment.Your job is to review how the BOM gathers and presents this data athttp://www.bom.gov.au/catalogue/data-feeds.shtml#xmlYou will be most interested in understanding the data gathered from stations. Once you have done this you are to perform the following tasks.Part 2A (2 marks)Install a Linux environment on your workstation, using a suitable hypervisor e.g. VirtualBox. Be sure to install the Apache Web Server and the Python programming language. If you prefer you can build this server on any Cloud computing environment such as AWS.Part 2B (4 marks)Write a Python Script which uses the Python Requests and JSON module to download the JSON object outlined before. The program MUST process the 3 days of data from this stream and report:• the maximum, minimum and average windspeed• the maximum, minimum and average temperaturePart 2C (4 marks)Modify your Python Program so that it produces a simple web page as its output. Once that is done, place the script in the CGI-BIN directory so that when it is accessed, it the user with a web page containing the above .The tutorial tasks over the semester will provide you with sufficient insight to complete these tasks.When completed, you must prepare a document with screenshots outlining the process you have taken to implement the above. You must include a copy of the script used in Part 2 and you must demonstrate your program working.

Order from Australian Expert Writers
Best Australian Academic Writers

QUALITY: 100% ORIGINAL PAPERNO PLAGIARISM – CUSTOM PAPER