Hit The Order Button To Order A **Custom Paper**

>> CLICK HERE TO ORDER 100% ORIGINAL PAPERS FROM AustralianExpertWriters.com <<

26 Aug
2019

MN621 Advanced Network DesignManagement &… | Good Grade Guarantee!

Prepared by: Dr Sanjeeb Shrestha & A/Prof Savitri Bevinakoppa Moderated by: Dr Ammar Alazab July, 2019
Assessment Details and Submission Guidelines
Unit Code
MN621
Unit Title
Advanced Network Design
Assessment Type
Assignment 1 T2 2019 Individual
Assessment Title
Network requirement analysis and plan
Purpose of the
assessment (with
ULO Mapping)
This assignment is designed to assess students’ knowledge and skills related to the
following learning outcomes:
b. Investigate suitable network designs to match requirements;
c. Create appropriate frameworks and standards for network
implementation;
Weight
15% of the total assessments
Total Marks
35 * (factor of) individual demonstration marks 20
Word limit
1200
Due Date
Week 8, 8/9/ 2019, Submit on the Moodle Shell.
Submission
Guidelines
 All work must be submitted on Moodle by the due date along with a Title Page.
 The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body) font
and 2.54 cm margins on all four sides of your page with appropriate section
headings.
 Reference sources must be cited in the text of the report, and listed appropriately
at the end in a reference list using IEEE referencing style.
Extension
 If an extension of time to submit work is required, a Special Consideration
Application must be submitted directly to AMS. You must submit this application
three working days before the due date of the assignment. Further information
is available at:
http://www.mit.edu.au/about-mit/institute-publications/policies-procedures
and-guidelines/specialconsiderationdeferment
Academic
Misconduct
 Academic Misconduct is a serious offence. Depending on the seriousness of the
case, penalties can vary from a written warning or zero marks to exclusion from
the course or rescinding the degree. Students should make themselves familiar
with the full policy and procedure available at http://www.mit.edu.au/about
mit/institute-publications/policies-procedures-and-guidelines/Plagiarism
Academic-Misconduct-Policy-Procedure. For further information, please refer to
the Academic Integrity Section in your Unit Description.
MN621 Advanced Network Design Trimester 2, 2019 P a g e | 2
Prepared by: Dr Sanjeeb Shrestha & A/Prof Savitri Bevinakoppa Moderated by: Dr Ammar Alazab July, 2019
Marks for assignment 1 will be calculated as follows:
Individual assignment 1 marks = marks obtained for individual submitted report * demonstration
marks/25
For example:
Student X gets
 28/35 marks for individual submitted report
 15/20 marks for individual demonstration in week 5, 6 and 7
Total marks for student X out of 35 = 28 * 15/20 = 28 * 0.75 = 21/35
Assignment Description
Case study scenario: Use an industry case study of your PBL exercise
Project Scope: Write project scope herewith.
Report requirements: The report should have a detail explanation of the planning and designing of a
network. It is recommended that bullet points are included whenever necessary. Use your Problem Based
Learning (PBL) tutorial findings.
1. Project Scope and requirements


Attach evidence of an industry visit as an appendix A: Industry visit evidence
Include points that you have gathered from an industry professional on their existing
network.
2. Network design and justification

Draw a network design that you think will be useful in future for the industry that you have
visited. Netwrok should include the following requirements as a miminum:
o 4 routers
o 6 switches
o 20 PCs
o
3 VLAN.

Suitable IP addressing scheme in tabular form (assume as many hosts as necessary for each
department).
Indicate where do you use static routing, dynamic routing protocols (name the protocols,
RIP, EIGRP, OSPF etc.), Access Control List (ACL) as per the network preferences. Justify your

choices.
3. Network configuration
Configure your network using Packet Tracer. Write report on



Packet Tracer Network diagram – Copy diagram from your simulator
Switch configuration
Router configuration


Host configuration
Access point and server configuration guidelines.
4. Timeline and Budget estimation
This section should include the followings:


Hardware requirements with the specification with costs
Human resources and logistics

Tentative timeline specifications.
5. Demonstration


Individual demonstration of packet tracer in Week 7.
Mandotory to demonstrate work-in-progress demonstration in week 5 and 6.
MN621 Advanced Network Design Trimester 2, 2019 P a g e | 3
Prepared by: Dr Sanjeeb Shrestha & A/Prof Savitri Bevinakoppa Moderated by: Dr Ammar Alazab July, 2019
Marking Criteria
The following tentative marking criteria will be followed for the assignment.
Marks
Section to be included in
the report
Description of the section
5
Project Scope and
requirements
Outline of the report (in 3-4 sentences), and briefly discuss
the requirements (not more than 10-12 sentences).
10
Network design and
justification
10
Network topology
diagram and
implementation
commands are for the dynamic routing
protocol used for the configuration, the
following commands for VLANs, creating
trunk links, static routes, etc.
 Connectivity testing ping snapshots.
5
Timeline and Budget
estimation
ports – Type of the cables – Name of the
server, PC with specification such as
operating system, RAM, hard disk, etc.
3
Summary
Well comprehended summary.
2
Reference style
IEEE reference style.
35
Total Marks
 Well-designed network diagram.
 Labelled with IP addresses.
 A clear description of the approach taken for the
design (may use bullet points for this).
 Well-designed topology diagram with simulating
software.
 Network devices and appropriate command for the
configuration should be detailed for implementation
purposes.
 It would be best to have
 Comments for the commands used for
configuration. For example, the following
 Hardware requirements with the specification with
costs
 Name of the network device with
manufacturer’s name, series, model and
 Cost specification of the hardware should be
included.
 Human resources cost need to be included on an
hourly basis.
 Timeline for the completion of the should be
detailed.
MN621 Advanced Network Design Trimester 2, 2019 P a g e | 4
Prepared by: Dr Sanjeeb Shrestha & A/Prof Savitri Bevinakoppa Moderated by: Dr Ammar Alazab July, 2019
Demonstration
Marks
Demonstration
Description
10
Work progression
check
Work progression record and consultation will be on week 5
and 6 by the lab tutor. Allocated marks to be awarded
accordingly.
10
Packet tracer demo
Demonstration of the network design in packet tracer on
week 7.
20
Total Marks
Marking Rubrics
The details about the rubric are as follows:
Grades
HD
80% and
above
D
70 – 79%
CR
60 – 69%
P
50 – 59%
Fail
<50%
Project scope
and
requirements
(5)
Concise and
specific to the
project
Topics
relevant and
soundly
analysed
Generally
relevant and
analysed
Some
relevance and
briefly
presented
Not relevant
to the
assignment
topic
Network
design and
justification
(10)
Demonstrated
excellent
ability to think
critically and
sourced
reference
material
appropriately
Demonstrated
excellent
ability to think
critically but
did not source
material
appropriately
Demonstrated
an average
ability to think
critically and
sourced
reference
material
appropriately
Demonstrated
an average
ability to think
critically but
did not
sourced
reference
material
appropriately
Did not
demonstrate
the ability to
think critically
and did not
sourced
reference
material
appropriately
Network
topology
diagram and
implementatio
n
(10)
All elements
are present
and very well
integrated
Components
present with
good
cohesion
Components
presented and
mostly well
integrated
Most
components
present and
an average
integration
Lacks
components
and not
integrated
well
Timeline and
Budget
estimation
(5)
Excellent
description
and
justification
and well
budgeted
Excellent
description
and
justification
and but
poorly
budgeted
Good
description
and
justification
and well
budgeted
Good
description
and
justification
but no well
budgeted
Poor
description
and
justification
poorly
budgeted
Summary
(3)
Excellent
comprehensio
n and precise
Excellent
comprehensio
n and but
fuzzy
Average
comprehensio
n and but
clear
Average
comprehensio
n and but
fuzzy
Not well
comprehende
d and fuzzy
MN621 Advanced Network Design Trimester 2, 2019 P a g e | 5
Prepared by: Dr Sanjeeb Shrestha & A/Prof Savitri Bevinakoppa Moderated by: Dr Ammar Alazab July, 2019
IEEE Reference
style
(2)
Clear styles
with an
excellent
source of
references
Clear
referencing
style
Generally
good
referencing
style
Sometimes
clear
referencing
style
Lacks
consistency
with many
errors
Demonstratio
n (Work
progression
check (10)
) and (Packet
tracer demo
(10))
Logic is clear
and easy to
follow with
strong
arguments
Consistent
logic and
convincing
Mostly
consistent
logic and
convincing
Adequate
cohesion and
conviction
The argument
is confused
and disjointed

QUALITY: 100% ORIGINAL – NO PLAGIARISM.

  • **REMEMBER TO PRECISE PAGE NUMBER**
  • Hit The Order Button To Order A **Custom Paper**

>> 100% ORIGINAL PAPERS FROM AustralianExpertWriters.com <<